• reviews
  • cooling
  • SilverStone PF360 ARGB AIO Watercooler Review
  • SilverStone PF360 ARGB AIO Watercooler Review



    The SilverStone PF-360-ARGB AIO Watercooler is designed for Intel Socket LGA2066 / 2011 / 1156 / 1155 / 1150 / 775 and AMD processors including AM4 Ryzen. Here is an overview of the system and testing methodology.

    The System as it was Tested

    MSI Z390 Ace – Z390 Chipset
    Intel Core i9 9900k (3.6Ghz) Octo Core 8 x 256KB L2 Cache 16MB L3 Cache

    SilverStone PF360-ARGB
    SilverStone PF240-ARGB
    Noctua NH-U121A
    EK Waterblocks Classic RGB P360

    The CPUID System Monitor was used to obtain and record system temperature data and being that this is a quad core processor we need something that will work across all of the cores at once.  For this task we're using a new version of Prime95 (p95v255a) that will allow you to spawn (n) instances to test with.

    Editors note: Even though the Windows 10 task manager reported 100% processor usage we could never attain a 100% of the rated heat output as documented by Intel when using Prime95 as a basis for that heat production. Knowing this we ran the stress test until the maximum temperature was attainted and stabilized.

    Other things to consider when judging software induced heat output.
    a) Clock throttling by the processor at high temperatures.
    b) Normal software isn't designed to produce maximum heat output.
    c) Variances of cooling temperature.
    d) Variances in CPU load.
    e) Inaccuracies in thermal diode readouts.
    Of course the list goes on..

    Our testing methodology is aimed to provide a real world look into this heatsink given the test system provided.

    Default Speed

    A C/W rating can quickly be calculated using this formula.

    C/W = (CPU temp - Ambient temp)/(Variance(%) * CPU Watts)
    Allowed variance for this test = 85%
    CPU Watts = 95W  (or 124W due to turbo clock)

    0.28 C/W = (53C - 24C)/(.85(124W))


    For this next test the CPU speed was cranked up to 5.3Ghz and the test was re-run.

    To calculate a new C/W rating for this test we will need to factor in the increased processor wattage. The formula and constants for this are listed below.

    ocC/W = dCPU Watts * (ocMhz / dMhz) * (ocVcore / dVcore)2
    ocMhz = 5300
    dMhz = 4700 (boost)
    ocVcore = 1.4
    dVcore = 1.2
    The variance still applies for our C/W calculation
    Allowed variance for this test = 85%
    CPU Watts = 190W

    0.33 C/W = (78C - 24C)/(.85(190W))

    Benchmark Conclusion

    In our heatsink and waterblock tests we don't really focus on overall load temperatures but rather how well the product can remove heat given a specified heat load. Since this is a real world testing method we need to take into consideration real world variables and estimate tolerances. This is why we normally only apply 85% of the total wattage output to our heat calculations.

    The resulting C/W number is used to rate how efficient a heatsink or waterblock is based on the given heat load. These numbers can be used to determine heat capacity, the larger the difference the less efficient the heatsink is. (aka not good for overclocking)

    As the charts show the PF360 AIO can clearly handle a Core i9 9900k, and when you look at it against the EK Supremacy 360 Kit you can see what benefit a larger radiator has.  Once again things change slightly when the system was overclocked with a healthy jump in the C/W number.  Even though the load temp is down 3 degrees due to the lower ambient temperature the C/W number is virtually identical to the PF240. 

    On a side note: I’m not sure if this is a product of more cores under the lid or the new soldering process of the Core i9 9900k but despite the 78c core temperature the radiator didn’t get all that warm nor did the core temperature waver much. 

    Keep in mind these calculations are provided for demonstration purposes only and may not reflect the actual lab tested C/W rating, but we're pretty close.