• reviews
  • cooling
  • be quiet Light Loop IO LCD AIO Cooler Review
  • be quiet Light Loop IO LCD AIO Cooler Review

    Author:
    Published:

    Benchmarks

    The be quiet Light Loop IO LCD is designed for Intel Socket LGA1851 / 1700 / 1200 / 1156 / 1155 / 1150 and all modern AMD processors.  Here is an overview of the system and testing methodology

    The System as it was Tested

    Z790 Aorus Elite X WiFi 7 – Z790 Chipset
    Intel Core i7 12700k (3.2Ghz) Sixteen Core 12+12 32KB L2 Cache 9+9 x 1.25MB L3 Cache 25MB 

    Coolers
    be quiet Light Loop IO LCD 240
    Cooler Master V8 ACE 3DHP
    Noctua NH-D15 G2

    The CPUID System Monitor was used to obtain and record system temperature data and being that this is a quad core processor we need something that will work across all of the cores at once.  For this task we're using a new version of Prime95 (p95v255a) that will allow you to spawn (n) instances to test with.

    Editors note: Even though the Windows 11 task manager reported 100% processor usage we could never attain a 100% of the rated heat output as documented by Intel when using Prime95 as a basis for that heat production. Knowing this we ran the stress test until the maximum temperature was attainted and stabilized.

    Other things to consider when judging software induced heat output.

    a) Clock throttling by the processor at high temperatures.
    b) Normal software isn't designed to produce maximum heat output.
    c) Variances of cooling temperature.
    d) Variances in CPU load.
    e) Inaccuracies in thermal diode readouts.
    Of course the list goes on..

    Our testing methodology is aimed to provide a real world look into this heatsink given the test system provided.

    Default Speed
    Benchmark Conclusion

    In our heatsink and waterblock tests we don't really focus on overall load temperatures but rather how well the product can remove heat given a specified heat load. Since this is a real-world testing method, we need to take into consideration real world variables and estimate tolerances. This is why we normally only apply 85% of the total wattage output to our heat calculations.

    The resulting C/W number is used to rate how efficient a heatsink or waterblock is based on the given heat load. These numbers can be used to determine heat capacity, the larger the difference the less efficient the heatsink is. (aka not good for overclocking)

    Normally we test 360mm coolers with this processor but since it is only a 240mm radiator I decided to throw in some aircoolers for reference.  As you can see the Light Loop did extremely bad, mostly due to the software default settings reacting to water temp and not system load.  This never triggered the fans to ramp up and temps to go "high".

    On the postive the cooler was dead silent so.. I guess there is that.

    Keep in mind these calculations are provided for demonstration purposes only and may not reflect the actual lab tested C/W rating, but we're pretty close.